Fogging up on the helmet visor is the most typical issue for a motorbiker. It’s really irritating to drive with a fogging-up helmet visor on the busiest road. If you use a glass with a helmet, this could be more dangerous as it also makes your glasses blurred. So, how do i make my helmet visor not foggy?
Though many suggest stopping breathing for a moment or opening up the visor, it’s not the solution that I prefer. Opening or increasing the ventilation system can help, but the most important thing is using an anti-fog visor insert or pinlock visor.
You can apply anti-fog products to get a quick solution and a safe journey with your helmet visor, not foggy while on the road.
What’s The Cause Of Helmet Visor Fogging?
The main reasons for fogging your visor are the climate conditions of your geographical location. Some conditions can affect your helmet visor-
- Colder weather
- Heavy rainfalls
- Higher humidity levels
Fogging up to the helmet visor is always linked to the fluctuation of the temperature. This difference can be between the temperature of the outside weather and the inside of the helmet. Fogging helmet is a common phenomenon in cold weather or rainy season.
Due to the temperature difference, a few droplets of the condensation inside your helmet visor can be visible. To put it very simply, when it’s raining or the low temperature outside and at the same time, your exhaled warm breath creates fogging of the visor.
This is the same thing we all did when we were young. Exhaling on a cold winter day, a blast of fog or smoke comes from our mouths. The moisture on your visor happens similarly in this way when your warm breath hits the cold visor.
Sometimes your visor can be fogged up from the outside when the humidity of the air is higher than the inside. Yet the question remains, how do i make my helmet visor not foggy? For these situations to solve, you have to remove the condensation. In this write-up, you’ll get some decent solutions for the fogging issue.
How Do I Make My Helmet Visor Not Foggy?
A helmet is an essential companion for a motorbiker. If you’re using a motorcycle helmet with glasses, it’s possible that the inside of your glass or visor fogs up and makes you trouble riding. As we said before, there are some simple and common reasons if the weather is not favorable, or you breathe warm in a cold visor.
When a visor condenses, you can’t see ahead, so riding in the early morning in the winter and rainy seasons is challenging. So, what do we need to do that our helmet visor does not get foggy? There is some particular workout that you can do to get rid of fogging from your visor-
Try Anti-fog Products
This is one of the practical solutions for the helmet fogging issue. Though anti-fog products are effective, they are also temporary because they will last 24 to 72 hours. To create an anti-fog layer on your visor, make sure you apply it to the entire surface.
If you’re an attentive and serious rider, you can apply this spray several times when you need. Sometimes the performance of the anti-fog spray gets worsen than the visor fogging. This anti-fog product reduces its effectiveness, especially in cold or humid weather.
Open Your Visor And Vents
Opening your visor or vents will help you improve the airflow inside your helmet. The open vents can reduce the temperature of the helmet and affirms moisture to run away. Make sure the vents are open before you start your journey; it’ll benefit you by reducing condensation. Opening the visor helps you with the fresh air, but it can create another issue.
This can create problems if it’s raining outside or snowing; your visor can’t help you out when it’s open. You’ll get refreshed air until the visor is open, but the condensation will continue again when you put it down.
Heated Shield
The same device used on the rear window of a car can be used for an electric heated shield. Don’t think your helmet gets hot; It’s not designed to heat the interior of your helmet. But warming up your shields will help prevent moisture buildup from your breath. You can choose these heated shields based on how often you go for a ride.
They can often be used for safety issues and an enjoyable riding experience. Though heated shield helmets are a bit more expensive than the regular ones, you can get a heated shied to attach to your existing one. But not all the brands support this way.
Use An Anti-Fog Visor Insert or Pinlock Visor
There are two types of helmet available, whether they are pinlock-ready or comes with a pinlock. Though some manufacturers designed their own anti-fog inserts, they worked as the inserts from pinlock. Between the visor and the pinlock, which serves as a dual-pane visor, the pinlock seals the air. This system uses a silicone bead to create a double-glazed window effect on the visor.
If your visor is ‘pinlock ready,’ which means if in your visor there are two little holes available, you can easily use it. If your helmet visor is not the one you’re looking for, you can use an anti-fog insert. You can use this product whether your helmet is pinlock-ready or not.
Dual Pane visor
The dual-pane visor is the most typical one that doesn’t need any electricity because it works like a pinlock. There are two panes on the dual pane visor; the outer one gets cold air, and the inner one doesn’t fog up while you breathe. The only reason for this is it’s not cold.
Use An Anti-Fog Mask
Several brands you’ll find have an anti-fog mask with which you can cover your nose and mouth. You need to attach the mask inside the helmet, but this doesn’t fit every helmet model. These anti-fog masks are 99.9% effective and offer that the riders don’t breathe in contaminated air while riding. There are other kinds of anti-fog masks that you can use that fit most people’s faces.
Your helmet visor will be able to breathe down and away from your nose and upper cheeks properly. You can fit the mask with a full-face, modular, or even with a motocross helmet. If you tend to wear glasses while riding, this anti-fog mask can fit with them too.
Silicon-Based Water-Repellents
This is another way your helmet will never fog up. You need to find a solution to repel water from the helmet. Make sure you invest in effective water repellent products and apply them to the visor. It will help you to continue the adventure without any fogging issues.
Wear a Neck Tube
A neck tube can work like a respirator mask to cover the rider’s mouth and nose. You can fasten this neck tube before you put on your helmet. If you’re using a helmet that doesn’t have the pinlock visor insert system, this neck tube can help you. It’s one of the affordable options because you can easily remove and put the neck tube whenever you want.
Anti-Fog Coatings
Like anti-fog spray, it’s not a permanent solution, but it can help you from fogging for a more extended period. If you get bored using the anti-fog spray, this can be the best solution for you as it lasts about 1 to 2 years. Don’t worry about using this anti-fog coating because most manufacturers use it. Moreover, they use various grades of hydrophilic ingredients to remove fogging on the visor.
What’s The Benefit Of Helmet Visor Not Fogging?
There are several anti-fog solutions for your visor we’ve provided. If you follow them, it’ll benefit you as it’s safe and makes your helmet for-free. Here are some benefits of helmet visor not fogging-
- Most importantly, it’s safe when your visor is not fogging. You can see the road and ride the motorcycle without any hesitation.
- If your visor is fogging up, and you keep open it while riding, there’s a chance of getting hit by stones, debris, or any bugs.
- It can be very risky if you don’t use any solutions and keep your visor up because you may have an accident.
What Can I Use To Clean My Motorcycle Helmet Visor?
You can use anti-fog products to clean your helmet visor but be careful if the cleaner is compatible with the material of the visor or not.
- First, remove the pinlock insert if your helmet has one.
- Check if your anti-fog spray has the cleaning material. Using this, make a quick clean of the surfaces of the helmet visor.
- Then spray the cleaner a few times in the front and back. Most of the spray guns automize the solutions into small parts.
- Let the liquid dry on the helmet visor first for a moment. But don’t try the anti-fog liquid spray ultimately.
- Now use a cloth and clean the rest of the anti-fog liquid.
Before using any anti-fog spray, make sure you read the instructions given by the manufacturers. Some visors, as we said before, have a built-in anti-fog coating on their inside.
This means that you must treat your helmet extra care if it is of that type. Suppose your lid has the drop-down sun shield; clean it too. Otherwise, you’ll see marks on it while riding into direct sunlight.
How To Make Your Own Anti-Fog Spray?
If you’re among those DIY people, then this is for you. Here is a simple anti-fog solution that you can use as a DIY.
- ¼ cup of water (Make sure you use distilled water).
- ¾ cup of rubbing alcohol
- Mix them with a drop of dish soap.
Put them all in a bottle and shake them before you use them on your helmet visor. If you are hesitating to use alcohol, you can go with vinegar.
- ⅓ cup of water (Don’t use tap water; instead, try with distilled water).
- Fill the cup with vinegar to the top.
Put the elements in a spray bottle to mix them well and shake them before use. There are some cheap anti-fogging hacks available also. The first thing a scuba driver is taught is to spit on the mask before going underwater. Spitting on the visor can be a natural anti-fogging cleaner.
You can use other ways, such as rubbing a cutting potato on the visor. Or even you can use shaving cream or baby shampoo on the helmet as an anti-fogging element.
Conclusion
We’ve cleared all the doubts regarding, how do i make my helmet visor not foggy? Hopefully, this write-up helped you to find the answer. Most of the time, I try some of these tricks, and it helps me to the utmost level. But the pinlock visor offers the greatest level of comfort. Still now, if you are going for a ride without an anti-fog helmet visor, consider your options first.
After this, enjoy riding with the anti-fog helmet visor when you go for a ride. It’ll make your ride more comfortable than any other time.
